Detailing

Exterior

Signature cleaning process, including:

• The vehicle is washed with pH-neutral shampoo, using a two-bucket system with grit guards so stones and sharp particles aren’t carried onto the car by the wash mitt.
• Wheels are cleaned with a non-acidic, citrus-based cleaner and specially designed brushes.
• Door shuts, petrol cap, arches and lower sections are cleaned (where accessible).
• The vehicle is hand-dried with microfibre towels.
• The paintwork is treated with a clay bar to remove bonded surface contaminants.
• Body solvent is applied to dissolve tar, road grime, honeydew, bug splatter and other petroleum-based deposits.
• Tyres are dressed.
• Exterior plastics and door trims are dressed.

Interior

• Carpets vacuumed.
• Windows cleaned on the inside.
• Interior trim and surfaces cleaned with aerospace-grade products.

Exterior

Level 1 process, plus:

• A thick layer of foam is applied to loosen, lift and remove dirt from the paintwork without causing micro-scratches.
• The vehicle is blown dry with a Black Baron vehicle dryer to prevent water streaks.
• The engine bay is cleaned.

Paint correction – 70–80% correction factor

• One- to two-stage correction to remove light imperfections such as minor swirl marks and increase gloss.
• Chrome and stainless steel surfaces are treated and protected.
• All light clusters are treated and protected.

Interior

• The vehicle is deodorised with an anti-bacterial treatment that breaks down odours and bacteria instead of masking them.

Exterior

Paint correction – 80–95% correction factor

• Paint thickness is measured with an ultrasonic paint depth gauge.
• Various lighting is used to assess the condition of the paintwork.
• Three-stage paint correction removes defects including medium swirl marks and holograms; panels are alcohol-wiped after every stage to check the true correction.
• Exhaust tips are rejuvenated with metal compounds.
• Glass is treated with nano polish.

Interior

• Carpets shampooed if necessary and dried with a wet-suction vacuum.
• Alcantara cleaned and revived with a dedicated cleaner.
• All leather surfaces cleansed and protected.
• Air vents, button surrounds and fascia cleaned with specialised brushes.

Exterior

• Door shuts are cleansed.
• Wheels are removed, cleaned on the inside, then refitted with wheel nuts torqued to the manufacturer’s specification.
• Wheels are cleansed, polished and sealed inside and out.
• The engine bay is detailed.

Paint correction – 95–99% correction factor

• Alloy wheels are paint-corrected.
• Three- to five-stage paint correction removes defects such as heavy swirl marks, holograms and minor scratches.
• Deeper surface scratches are levelled with specialist finishing papers, and the paintwork is checked with a digital microscope in specific areas.

Interior

• Seat belts steam-cleaned.
• All leather cleaned, de-glossed, nourished and protected with leather guard.