Detailing

Exterior

SIGNATURE CLEANING PROCESS INCLUDING:
- - - • The vehicle is washed using PH neutral shampoo using twin grit guard bucket system to prevent any stones and sharp edged particles being carried onto the car via wash mitt.
• Wheels are cleaned using a nonacidic citrus based cleaner and specially designed brushes.
• Door shuts, petrol cap, arches and lower sections will be cleaned (where accessible).
• The vehicle is hand dried using microfibre towels.
• The paintwork is treated with a clay bar to removing bonded surface contaminants.
• Body solvent is applied to dissolve and remove tar, road grime, honey dew and bug splatter deposits and other petroleum based substances.
- • Tyres are dressed.
• Exterior plastics and door trims are dressed.

LEVEL 1 PROCESS INCLUDING:
- - - - • A layer of thick white foam is applied to the vehicle to help loosen, lift and remove dirt particles from the paintwork without inducing micro scratches.
      - • The vehicle is then blown dry with “Black Baron Vehicle Dryer” peak airflow rate of just over 330mph, eliminating water streaks.
      - • The engine bay is cleaned.
PAINT CORRECTION – 70-80% CORRECTION FACTOR
• Paintwork is treated to a one-to-two stage correction process, to remove light paint imperfections, such as minor swirl marks to increase the gloss factor.
• Chrome and stainless steel surfaces are treated and protected.
• All light clusters are treated and protected.

The vehicle is deodorised using specially designed anti-bacterial treatment, which breaks down and eliminates bad odour and bacteria instead of masking them.

PAINT CORRECTION – 80-95% CORRECTION FACTOR
- - - - • Paint thickness is measured using an ultrasonic paint depth gauge.
      - • Various lighting is used to establish the condition of the paintwork.
      - • Paintwork is treated to a three stage paint correction process to eliminate defects including medium swirl marks and holograms. Panels are alcohol wiped after every stage to ensure true correction. Exhaust tips are rejuvenated with specially designed metal compounds. Glass is treated with nano polish.

Carpets are shampooed if necessary and dried using a wet suction vacuum cleaner. Specifically designed Alcantara cleaner is applied to revive the Alcantara fibres. All leather surfaces are cleansed and protected. Air vents, button surrounds and fascia are cleaned using specialised brushes.

• Door shuts are cleansed.
- - - - • Wheels are removed, cleaned on the inside and cleansed, then all wheel nuts are torque set to the correct manufacturer’s specifications.
      - • Wheels are cleansed, polished and sealed inside and out.
      - • Engine bay is detailed.
PAINT CORRECTION – 95%-99% CORRECTION FACTOR
• Alloy wheels paint corrected.
• Paintwork is treated to a three-to-five stage paint correction process to eliminate defects such as heavy swirl marks, holograms and minor scratches.
• Deeper surface scratches are leveled using specifically designed finishing papers. Paintwork is checked using a digital microscope in specific areas.

• Safety belts are steam cleaned.
• All leather surfaces are cleaned, de-glossed, fed with essential oils and then protected with leather guard.

Crystal Serum Ultra features: